TOP TIPS FOR SAFE & SIMPLE USE OF A CIRCULAR SAW
Perfect for cutting timber, wall panels and particle board, the 18V Circular Saw is here to help you tackle your latest DIY projects. With the added convenience of the cordless operation and a compact design it makes cross cuts and 45° bevel cuts simple & easy.
Here are some of our top tips for safe and simple use of this versatile power tool:
The speed and quality of the cut depends on the condition of the saw blade. So before getting started make sure you check the saw and the blade for chips or broken teeth. Make sure the lower blade guard reacts smoothly and snaps back when released.
Keep the base guide as flat and even on your workpiece while you’re moving though a cut. It’s recommended to position the saw with the motor facing inwards towards the larger section of the board that isn’t falling away when cut. This allows the cut to be supported while the severed piece drops away.
A straight cut guide is your secret to a perfect square crosscut. Simply guide the edge of the guide along the edge of your workpiece to produce a clean, square cut.
Keep your workplace safe and your lines steady by always clamping your workpiece to your workbench.
Check out the 18V Circular Saw today to get started on your next project with Ozito.