DIY DECKING REVAMP – THE RENOVATORS
Garden decking can become weathered and worn as the seasons change. Here’s the best way to get your deck back to looking its best:
Step 1: Brush it back
Sweep your deck, removing all dirt and leaves.
Step 2: Scrub the deck
In a large bucket mix Deck Clean with water. Using a tough brush and the Deck Clean mix, scrub the deck thoroughly.
Step 3: Check for loose boards
Assess your timber decking boards for any loose screws or boards to replace.
Use a Reciprocating Saw to cut out timber boards to replace. Use an impact driver to tighten off loose screws or fix down new lengths of decking timber.
Step 4: Sand it back
Sand back any sharp edges or rough sides. A Belt Sander makes quick work of removing large amounts of material on flat surfaces. A Random Orbital Sander gives a great finish when paired with varying grits to bring your timber back to a smooth finish.
Step 5: Finish it
Give your deck a final once over with a vacuum cleaner or broom to remove sanding dust and debris. Get your decking coat or oils out to finish your newly revamped deck.
Whatever DIY job you need to tackle this Easter weekend, Team Up with Ozito!